Teflon belt for sealing machine is designed for vertical packaging machines to pack toilet tissue and hygiene rolls, this continuous sealing machine belt acts as a non-stick and heat transfer barrier between heating plate and wrapping film. Each machine require two belts two belts that run in tandem side by side with a hot plate that in contact with the inside of the belts as they run. The hot plate heats the belts to melt the plastic wrapping on both sides at the same time as it conveys the roll and tissue through the machine.

Heat press pillow is essential for T-shirt or sublimation heat press transfer, the pillow is combined with Teflon coated fabric on the outside and heat resistant foam inside. The non-stick heat press sheet is waterproof, reusable and heat-resistant, helps to protect your working surface very well and improve the service life of the heat press machine. Inside foam allow for even pressure across your vinyl and stopping buttons, zippers, thick seams getting in the way. Heat transfer pillow can be customized into different sizes.

Self Adhesive Teflon Sheet 0.13MM is made of Teflon sheet with adhesive backing, basic Teflon sheet is in thickness of 0.13mm, adhesive system is high pressure sensitive silicone adhesive in thickness of 0.05mm applied on one side, in this case, overall thickness of this tape is 0.18mm. Adhesive backed Teflon sheet is with yellow corrugated release film on the back, it is easy to peel off when you prepare to use the tape. Teflon sheet with adhesive has non-stick surface on one side and high bonding adhesive surface on the other side, the sheet can be continuously working during temperature between -73-260 ℃(-100-500℉), at the same time, provide chemical resistance, dielectric properties and high tensile strength. Main application include Non-stick cover of sizing rolls for textile printing and dyeing processing, Tray liners for food processing, Cover the roll coater for tacky or adhesive material, Composite mold release or welding, Cover friction areas of chutes, hoppers and guide rails.

Teflon tape electrical is produced from a skived PTFE film or extruded PTFE film coated with pressure sensitive silicone or acrylic adhesive. The basic film provides smooth and non-stick surface, high tensile strength, low elongation and high dielectric strength. This tape has been etched on one side to be applied with adhesive, so it is self adhesive and easy to bond other materials. The tape is ideally suited for the manufacture of high temperature seals, insulators and bearings used in semiconductor, aerospace and chemical processing industries.

Silicone coated glass fabric in thickness of 0.25mm in red color is made from plain weaved E-glass fiberglass cloth substrate coated with formulated liquid silicone rubber on both sides. Silicone rubber coating increases the strength of this fabric, provides good properties of flexibility and abrasion resistance, water, oil and chemical proof. Silicone rubber coated glass fabric withstands low and high temperature between -73-260 ℃(-100-500℉), although both PTFE coated fiberglass fabric and silicone coated fiberglass fabric have excellent release property, silicone coated glass fabric is better for applications also need surface grip. Surface of this fabric can be glossy or matt for customer to choose from, glossy type provides a smooth surface while matt one provides a dust free surface.Scifluo produce one-sided or double-sided silicone coated glass fabric with a wide range of coating weight, widths and colors for different applications. Common applications of silicone coated fabric include removable insulation jackets, flange spray shields, welding curtains and blankets, expansion joints, high-temperature gaskets and seals.

PTFE seamless belt is made of fiberglass specially knitted to be seamless and then impregnated with PTFE resin on both sides, seamless belt overcomes the problem of break down at joint, not stable and deflecting that belt with joint may occur due to girth difference on both sides at the joint part, this seamless woven substrate ensure high mechanical strength, significantly increased life span of belts. With PTFE coating, the belt has non-stick surface, high heat resistance, wide used for fusing, curing and lamination process, there will be no joint markings transfer to the finished products and the seamless provides longer lifetime.

Heat resistant Teflon tape T008 is using 0.08mm thick PTFE coated fiberglass as basic material, one side be etched by special chemical process and then be applied with 0.05mm silicone adhesive, thus total thickness of this tape is 0.13mm. PTFE coating side has smooth, abrasion resistant and non-stick surface, adhesive side provides high bonding to machine under high temperature. The tape is self-adhesive without release film, normally in narrow width like 1/2”, 3/4”, 1-1/2” and 2” for heat sealing application. Other applications include hot sealing in packaging industry, tank seals and chute liners in chemical industry, wire and cable insulation in electronic industry.

Teflon belts for tortilla machine is called tortilla press belt. The belt is made by woven fiberglass fabric coated with standard PTFE coating or unique PTFE coating. Teflon belt with unique coating is specialized used for tortilla machine, a hot platen compresses the dough on this belt to create the tortilla crust, its high release property prevent dough sticking to the belt under high speed. Normally the belt is made by castellated joint, steel sensor can be customized on the belt to avoid pressing at the joint part.

Black Teflon Coated Fiberglass Fabric is a new type of functional fiberglass composite material with anti-static properties. It is made of glass fiber as the substrate and coated with a layer of permanent anti-static PTFE resin. The surface resistance value of the anti-static PTFE fiberglass is 10^6-10^9 Ω, which has good electrical conductivity and can quickly release static electricity.1mm thick Black Teflon coated fiberglass fabric is widely used as an expansion joint in chemical plants, oil refineries, power plants and other fields. The thinner type like 0.25mm can be used to connect pipes are widely used in the production process of polymers, such as plastic extrusion, film blowing, and injection molding.

PTFE coated Kevlar fabric consists of a Kevlar fabric support coated with PTFE (polytetrafluoroethylene). The Kevlar fabric has unique strength in flex fatigue resistance and edge tear strength. PTFE coating ensures a non-stick, chemical resistant surface. The combination of PTFE and Kevlar makes PTFE coated Kevlar fabric meet industrial applications requiring very high tensile strength with light weight.