High temperature Teflon tape supplied by Scifluo in China is made from PTFE coated fiberglass fabric or PTFE film coated with pressure sensitive silicone adhesive or acrylic adhesive in thickness of .003” on one side . The tapes with pressure sensitive silicone has a very high operating temperature range of -73°C to +260°C and acrylic adhesive withstand -73°C to +170°C . Since PTFE coated fabric and PTFE film have non stick surface, they will be one side etched before applying adhesive, Scifluo has special etching formula to ensure strong bonding between adhesive and basic fabric or film. High temperature PTFE Teflon adhesive tape includes PTFE tape with silicone adhesive, PTFE tape with acrylic adhesive, PTFE film tape and PTFE zone tape.
PTFE Glass Cloth Tape 0.15MM 6mil
Phone:+86 180 6108 1617
PTFE glass cloth tape is composite material made of PTFE impregnated with glass cloth, combines the non-stick and heat resistant properties of PTFE with the mechanical strength of glass cloth. Scifluo provides PTFE glass adhesive tape coated with high temperature resistant pressure sensitive silicone adhesive on one side. PTFE coating side has a good heat and chemical resistance along with excellent release characteristics, adhesive side makes the tape easy to be applied on machine or any work surface, provides strong adhesion under high heat. 0.15mm PTFE coated glass cloth tape is normally with yellow release liner at the back. We can also die cut the tape into gaskets and strips or cut to any width to suit your requirement.
High temperature resistance up to 260°C.
Excellent release, anti-adhesion and sliding properties
Good Abrasion, low co-efficient of friction.
Anti-stick surface, Easy to clean
Good chemical solvent and corrosion resistance
Food grade coating, safe for food contact
Good electrical insulation and dielectric properties
Water-repellent property and moisture resistance
Specifications of PTFE Glass Cloth Tape T015
Basic fabric thickness: 0.15mm
Adhesive thickness: 0.05mm
Total thickness: 0.20mm
Backing: with yellow release liner
Max width: 1250mm
Normal Length: 10m, 30m,33m,50m
Technical Data Sheet of T015
9.32 oz/sq yd
240 N/cm Warp
137 lbs/inches Warp
200 N/cm Weft
114 lbs/inches Weft
Vinyl window manufacturing
PTFE glass cloth tape is used as a release medium for UPVC window welding machine covering the high temperature platen that weld the plastic frame before joining. Non-stick surface prevents melted PVC from sticking to the weld plate, helps to ensure a clean weld and keep a clean weld surface. The end of the UPVC frame that is to be welded is hardly pressed against the surface of the PTFE tape, thus abrasion resistance affects lifespan a lot, 0.15mm PTFE glass adhesive tape has higher content of PTFE coating, will be the best choice for this application.
Used as masking protective cover to prevent solvents or oil.