Scifluo has been supplying heat resistant fabrics and tapes coated with PTFE or silicone for over 10 years. Our advanced fabrics are used in various applications for a wide range of industries.
Phone:+86 180 6108 1617
Heat press cushion is essential for heat press heat transfer vinyl, the cushion is made of non-stick heat press Teflon sheet and fire resistance high density foam, the pillow is great for protecting your heat transfer working surface. Thick seams, pockets and zippers will be a problem of the past, this sublimation pressing pillow helps to lift the print area of your garment making the surface smooth and evenly distribute pressure for HTV onto zippers, buttons, thick seams and mesh, the interior soft foam comes back to form after each press.
Continuously temperature resistance up to 260℃/500℉
Eliminate the indentation from the top platen to pressed garments
Reusable, non-stick surface
Suitable for ironing transfer, heat transfer vinyl projects and screen print
Fire retardant materials
Increase speed of heat pressing process
Protect working surface very well
Easy to clean and remove stains, labor-saving
10mm or 20mm
5inch x 5inch - 12cm x 12cm - (baby onesies or small garments)
10inch x 10inch - 25.4cm x 25.4cm
12inch x 14inch - 30.5cm x 35.6cm
16inch x 20inch - 40.6cm x 50.8cm
Some peeling may happen from the corner of the design which is at the thick seam on the shoulder part of onesies or near the buttons, zippers, one reason of this problem is that the design did not get enough pressure when process heat transfer vinyl. To solve this problem, you will need a sublimation pressing pillow, insert a pillow inside or under the cloth, put vinyl on the front, those seams, zippers or buttons will be absorbed into pillow, then you will get evenly distribute pressure and heat transfer for HTV. You can also place one piece Teflon heat press sheet underneath to avoid burns and protect the workbench.