Scifluo has been supplying heat resistant fabrics and tapes coated with PTFE or silicone for over 10 years. Our advanced fabrics are used in various applications for a wide range of industries.
Phone:+86 180 6108 1617
Fusing machine belt is PTFE fiberglass belt specialized for fusing machines, the belt has non-stick surface, offers excellent quick release property, high temperature resistance up to 260°C(500℉) and longer lifetime. Anti static additive can be added to the belt if required, edge reinforcement and tracking system can be customized on the belt in order to increase life span of belt. Common edge reinforcements include PTFE coated fabric, PTFE film and Kevlar fabric. Common tracking system include PTFE cord, Kevlar cord, silicone cord and stainless steel studs.
Withstand high temperature from -70-260℃(-158-500℉)
Without leaving marks on laminated garment
Anti static effect available if required
Smooth and non-stick surface
High tensile strength and dimensional stable
Longer lifetime than Teflon belt with joint
Abstain from chemicals and solvent
Non-toxic and food grade, can be used in food industry
Fusing machine belt is divided into seamless fusing machine belt and seam fusion belt.
Seamless fusing machine belt is made of high quality fiberglass yarn knitted by unique equipment and coated with fine PTFE resin. overcomes the shortcoming that junction of seam fusion belt easy to break and the possibility of running deviation. Some sizes of belts are not able to be made into traditional seamless fusing belt, then Scifluo will make these belts into laminated belts which is also seamless, we use one layer anti-static PTFE fabric inside and another layer tear-resistant PTFE fabric outside, two layers of fabric staggered and welded together, the connection part is untouchable. Laminating process improved tensile strength, abrasion resistance and using life of belts.
Seam fusion belt means fusing belt with joint, advantage fusing belts is its lower cost. Normally There are three splice methods for this belt:
Overlap splice - Overlap joint is suitable for applications where even surface is not critical, this type of joint is easy to make, just cut ends straight or diagonally, overlap two ends and heat sealed, the seam is durable but has double thickness.
Butt splice - Butt joint is making two ends butted together and reinforced with a strap underside to offer additional strength, this thinnest reinforce strap from Scifluo is in thickness of 0.04mm, there is nearly no step on the joint part.
Scarfed splice - A scarf joint is using grind to make two ends tapered first to minimize the thickness at the splice area, then overlapped and heat-sealed. This joint type is more suitable for thicker belts.
Common sizes of Fusing Machine Belt
460mm x 1540mm/1830mm
625mm x 1400mm/2000mm
910mm x 2450mm/2450mm
1010mm x 2450mm/2450mm
1400mm x 3920mm/4500mm
1600mm x 3920mm/4500mm
1600mm x 3920mm/5270mm
220mm x 1550mm/1830mm
450mm x 1550mm/1830mm
450mm x 1360mm/1660mm
600mm x 2450mm/3890mm
600mm x 2840mm/4708mm
700mm x 3890mm/4700mm
1000mm x 3090mm/4500mm
1000mm x 3890mm/6000mm
1400mm x 3090mm/4500mm
1400mm x 3890mm/6000mm
1440mm x 2790mm/4760mm
1600mm x 4880mm/4880mm
600mm x 1940mm/2300mm
620mm x 1940mm/2320mm
620mm x 2840mm/4340mm
1050mm x 3890mm/4340mm
1240mm x 3890mm/6700mm
1640mm x 3890mm/4340mm
1640mm x 5450mm/6700mm
1640mm x 4720mm/5100mm
1880mm x 3890mm/6000mm
1880mm x 6700mm/9200mm